Hyce Sheet Carry Handle
The Hyce Sheet Carry Handle is design specifically for the safe lifting of large sheet objects. The cradle is shaped to allow easy manual handling and transportation of large, flat objects such as plasterboard, plywood, cement sheeting, particle board and glass.
Hyce Large Object Carry Handle
The Hyce Large Object Carry Handle is designed specifically for manual lifting of large and bulky objects. Its cradle is shaped to allow easy transportation of large objects such as cabinets and whitegoods and can usually interlock with the object’s feet, allowing for added support from the carry handle.
Mechanics
Rotating Handle
The Hyce Carry Handle is equipped with a rotating handle which can be adjusted to the optimal angle to maximise work safety and manual lifting practices.
To adjust the angle of the handle:
Slide the locking tab back to release the handle.
Rotate the handle to one of the 8 angles.
Lock the handle into place by sliding the locking tab back to its original position.
Handle Length Adjustment
The length of the Hyce Carry Handle can be adjusted to accommodate any user, regardless of their height, and any load, up to the maximum allowable weight, regardless of its size.
To adjust the length of the Hyce Carry Handle:
Slide the lock bar cover up to expose the lock bar.
Rotate the lock bar down 90 degrees.
Slide the inner shaft to the desired position.
Rotate the lock bar to the vertical position, and then slide the lock bar cover back.
Pendulum Cradle
The pendulum cradle is designed to ensure the load remains parallel to the ground, eliminating the risk of damage to the load, while promoting a safe lifting technique.
This pendulum cradle feature also makes manual lifting of large, awkward loads up or down stairs or ramps much easier and safer.
The pendulum cradle also incorporates an anti-slip pad, which most lifting equipment products do not consider.